Protection

After preparation below the water line services include anti fouling paint, epoxy coatings and Spikes PT, a.k.a. Protectin Thangs. Polishing services are followed by protection above the water line with the most advanced bio-friendly protection available for the exterior of your boat with options for your preference of extended protections. Boat Wax, Permanon yacht supershine, Spike’s PT, carnauba wax and Ceramic Pro offer different levels of sustainable protection. 

 

Protection
Level I

Anti foul paint touch up on Bottom

Bottom paint should only be used as needed. This option allows focus on the areas below the waterline that experience more wear and/or ablation from regular travel. The waterline, chipped areas, keel creases and the bow break receive your choice of compatible anti-foul pain.

Service Features:

  • Waterline precision tape
  • Through hull masking
  • Focused scuff preparation
  • As needed anti foul application
Protection
Level II

Sailboat bottom Anti foul application

One full coat of compatible antifoul paint. Paint selection and cost is the responsibility of the customer while we are willing to make best recommendations. The waterline, chipped areas, keel creases and the bow break receive additional paint to increase the protection in heavy wear zones Props, through hull fittings, anodes and prop shafts are detailed and masked before painting.

Service Features:

  • Waterline precision tape
  • Through hull masking
  • One coat anti foul application
  • Cost of paint not included
Protection
Level III

Powerboat bottom Anti foul application

One full coat of compatible antifoul paint. Paint selection and cost is the responsibility of the customer while we are willing to make best recommendations. The waterline, chipped areas and the bow break receive additional paint to increase the protection in heavy wear zones. Outdrives, props, trim tabs, anodes through hull fittings and/or prop shafts are detailed and masked before painting.

Service Features:

  • Waterline precision tape
  • Through hull masking
  • One coat anti foul application
  • Cost of paint not included
Protection
Level IV

Epoxy Barrier Paint Coating

3 Coats on Bottom - Epoxy barriers are only applied after complete removal and/or new hull preparation sanding. 3 full coats are the minimum, but 6 full coats being our recommendation for maximum bottom protection. Outdrives, props, trim tabs, anodes through hull fittings and/or prop shafts are detailed and masked before painting. This temperature and time sensitive process requires significant logistical planning to achieve best protection.

Service Features:

  • Waterline precision tape
  • Through hull masking
  • Three coat epoxy paint application
  • Cost of paint not included
Protection
Level V

Permanon Yacht SuperShine

DECK: $7.00/FT - HULL: $5.00/FT - BOTTOM: $5.00/FT

Permanon Yacht Supershine Professional is a nano-engineered surface protection solution for all personal watercraft, boat or ship finishes resulting in a brilliant protected shine that is incredibly easy to maintain. Permanon Yacht Supershine’s natural Silicium (14Si) coating extends the life of boat/yacht paint, gel coats, and fiber glass due to its extremely high salt and oxidation resistance.

Service Features:

  • Window protection
  • Stainless protection
  • Gel coat protection
  • Non-Skid protection

Protection
Level VI

Profile Rapid Detailer

DECK: $12.00/FT - HULL: $10.00/FT - BOTTOM: $10.00/FT

Fast liquid spray wax for that ‘just waxed’ look or simply a quick clean. It removes surface contaminants including compound residue, light dirt, dust and fingerprints to leave a ‘just waxed’, high gloss finish. Simply spray or wipe on and buff off, suitable for all surfaces compatible with all waxes Will not remove previously applied polishes and waxes from the surface aiding continuous protection.

Service Features:

  • Quick to Use
  • Removes Surface
  • Contaminants
  • High Gloss Finish
  • Paintwork, Rubber, vinyl, plastic glass and chrome
Protection
Level VII

Spike's Protectin Thangs ™

DECK: $20.00/FT - HULL: $15.00/FT - BOTTOM: $15.00/FT

Spike’s Protectin Thangs™ is proven to reduce or eliminate surface damage and is a great exterior surface sealant for boats large or small. Protect your investment from the very beginning with a product that will produce an unbeatable shine. Spike’s PT is the only coating that is trusted for our Beautiful Boat Warranty ©

Service Features:

  • Polarizing wash
  • Window protection
  • Stainless protection
  • Gel coat protection
  • Perfect for Paintwork, Rubber, vinyl, plastic, glass, and chrome
Protection
Level VIII

Ceramic Pro Marine

DECK: $60.00/FT - HULL: $40.00/FT - BOTTOM: $40.00/FT

*PROFESSIONAL INSTALLATION ONLY*

Ceramic Pro offers the ultimate coating to protect gelcoat and other marine surfaces. Never before has there been a single coating system that would offer protection for every surface on a watercraft and becomes a protective barrier preventing oxidation and growth of barnacles, sea organisms and algae on the Bottom. Stains comes off easy and cleaning the vessel can now be done in half the time.

Service Features:

  • Longevity 1-5 years
  • Easy to Maintain
  • Thermal resistance from -50°C to 1200 °C
  • Resistance to corrosion and oxidation
  • UV Protection
  • Perfect Gloss
  • Chemical Resistance
  • Low volatile components
  • Fluorine Free
  • Eco-Friendly